Homepage |
Products |
Order data sheets |
Assembly instructions |
Storage and maintenance |
About us |
Certificates |
News
Worm gearbox with base and lever Series "FL"
Worm gearbox Series MF or M - F single or with spur gear is assembler to the special base and the input of the gearbox is connected with special lever.
Working angel of the lever is 90° and could be adjusted about +- 5° in end positions. In special cases MW gearboxes for 180° could be used in the same way with base and lever.
Gearboxes are in manual or motor execution. Lever has conical bore with ratio 1 : 10 for ball joint according DIN 71831.
Base is equipped from 2 to 6 mounting holes according it's size.
Except of standard environmental execution gearboxes for low and high temperatures could be supplied.
| Gearbox type | Max. output torque | Motor adapter | Factor | Ratio |
|---|---|---|---|---|
| FLM 10 | 500 Nm | F10/G0 | 11 | 40 : 1 |
| FLM 12 | 1000 Nm | F10/G0 | 11,3 | 42 : 1 |
| FLM 14 | 1800 Nm | F10/G0 | 16,2 | 60 : 1 |
| FLM 15 | 2500 Nm | F10/G0 | 20,5 | 68 : 1 |
| FLM 15/SI3,5 | 3400 Nm | F10/G0 | 67,6 | 238 : 1 |
| FLM 16 | 4500 Nm | F10/G0 | 26,5 | 88 : 1 |
| FLM 20 | 6500 Nm | F10/G0 | 45,8 | 183 : 1 |
| Gearbox type | A | B | B1 | C | D1 | F | J | L1 | L2 | L5 | K | L |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FLM 10 | 212 | 145 | 40 | 22 | 18 | 11 | 55 | 200 | 145 | 220 | 100 | 200 |
| FLM 12 | 212 | 145 | 40 | 22 | 18 | 11 | 55 | 200 | 165 | 220 | 100 | 200 |
| FLM 14 | 380 | 238 | 60 | 22 | 20 | 22 | 70 | 300 | 200 | 330 | 280 | 300 |
| FLM 15 | 380 | 238 | 60 | 22 | 20 | 22 | 70 | 300 | 200 | 330 | 280 | 300 |
| FLM 15/SI3,5 | 380 | 238 | 60 | 25 | 20 | 22 | 70 | 300 | 200 | 330 | 280 | 300 |
| FLM 16 | 440 | 290 | 90 | 32 | 30 | 28 | 176 | 400 | 200 | 435 | 340 | 350 |
| FLM 20 | 440 | 290 | 90 | 32 | 30 | 28 | 176 | 400 | 200 | 435 | 340 | 350 |